کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1642337 | 1517230 | 2015 | 4 صفحه PDF | دانلود رایگان |

• Porous WS2 film was deposited via a magnetron sputtering method.
• Ridge-like Ni architecture coated Cu foil was used as current collector.
• The WS2/Ni/Cu exhibit excellent electrochemical performance as anode for LIBs.
Porous WS2 films have been deposited on ridge-like Ni coated Cu foils using a magnetron sputtering system, their morphology and structure were characterized by field-emission scanning electron microscope, high-resolution transmission electron microscopy and micro-Raman spectrometer. Electrochemical evaluation showed that, as negative electrode for lithium-ion batteries, the representative ridge-like Ni supported WS2 film electrode performs a high reversible capacity and excellent rate capability which can deliver a discharge capacity as high as 1180 mA h g−1 after 100 cycles at 100 mA g−1. The capacities almost remain the same as the current density increases from 100 to 800 mA g−1. Even at 1600 mA g−1, the electrode can deliver a capacity as high as 986 mA h g−1.
Figure optionsDownload as PowerPoint slide
Journal: Materials Letters - Volume 158, 1 November 2015, Pages 9–12