کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1645975 1517297 2013 4 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
The microstructure and mechanical properties of an Al–CuO in-situ composite produced using friction stir processing
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
The microstructure and mechanical properties of an Al–CuO in-situ composite produced using friction stir processing
چکیده انگلیسی

Friction stir processing (FSP) was applied to produce aluminum based in situ composite from powder mixtures of Al–CuO. Fabricating the in-situ composite required combining the hot working nature of FSP and the exothermic reaction that occurs between aluminum and CuO. The reinforcements in the composite include nanometer-sized Al2O3 and Al2Cu particles. These Al2O3 nanoparticles were present in the form of clusters, which were identified as amorphous in the FSPed specimen. The average Al grain size in the FSPed composite was approximately 1 μm. The composite exhibited superior strength and ductility. The major contributions to the high strength of the composite are the ultrafine grained structure of aluminum matrix and the fine dispersion of nanometer-size reinforcing particles inside aluminum grains.


► Al–CuO nanocomposites are fabricated using friction stir processing (FSP).
► Nanometer-sized Al2O3 and Al2Cu particles are formed in situ in the composite.
► FSP refines the Al-matrix grain size to approximately 1 μm.
► The Al–CuO composite exhibits yield strength of 284 MPa and good ductility.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Letters - Volume 90, 1 January 2013, Pages 26–29
نویسندگان
, , ,