Characterization of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) thin film deposited through electrohydrodynamic atomization technique

This article presents an attractive printing technique for thin film deposition of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) on flexible substrates known as electrohydrodynamic atomization (EHDA). Optimum flow rate and applied potential for stable cone jet mode has been confirmed through identification of process operating envelop. The uniformity and film thickness has been investigated by a field emission scanning electron microscope. The thin film shows nearly 75–82% transmittance in visible region. The electrical study shows good ohmic behavior of PEDOT:PSS thin film with the resistivity of approximately 49.6 mΩ cm.

► PEDOT:PSS thin film is deposited through electrohydrodynamic atomization technique
► Deposited PEDOT:PSS thin film showed good transparency in visible region
► Scanning electron microscopy revealed the morphology of PEDOT:PSS thin film
► Good adhesion between film and substrate due to cone-jet based coating technique