Effect of lattice-mismatch strain on the structural and dielectric properties of (Pb,Sr)TiO3 thin films grown by pulsed laser deposition

Pb0.35Sr0.65TiO3 (PST) thin films have been fabricated on LaAlO3 (LAO) and MgO substrates using the pulsed laser deposition technique. The microstructure characteristics of the films were examined by means of X-ray diffraction, atomic force microscopy, scanning electron microscopy and Raman spectroscopy, and the results indicate that the films are epitaxially grown and show good crystallinity. The dielectric constant dependence on DC bias voltage and temperature were measured in a planar capacitor configuration for these films. Compared to the PST thin film grown on LAO, the film grown on MgO showed a higher temperature of the capacitance maximum and a higher dielectric constant at zero bias. We explain the results by taking into account the lattice-mismatch strain between the substrate and the film. In contrast to the in-plane compressive strain induced by the LAO substrate, the in-plane tensile strain induced by the MgO substrate enlarges the unit cell of PST and enhances the magnitude of dipole moments, which increases the dielectric constant. These results indicate that a reasonable in-plane tensile strain could improve the dielectric properties of PST thin films.