کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1653447 | 1517344 | 2006 | 8 صفحه PDF | دانلود رایگان |
The effect of the welding speed and the rotation speed on the microstructure in the stir zone has been investigated by measuring the Si particle distribution in the ADC12 alloy. The stir zone has fine recrystallized grains without dendritic structures, and the eutectic Si was uniformly dispersed in the stir zone. The size of the Si particles was statistically determined in the stir zone using image processing. The number of finer Si particles, which is formed by stirring of the tool probe, increases during the FSW. Finer Si particles are distributed more in the bottom than in the other regions, though the size of the Si particles in the base metal is the same in all the regions. The size of the Si particles decreases with increasing welding speed. However, it is not significantly affected by the rotation speed.
Journal: Materials Letters - Volume 60, Issues 29–30, December 2006, Pages 3830–3837