کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1657244 1517613 2015 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Photocathodic protection of iron oxide nanotube arrays fabricated on carbon steel
ترجمه فارسی عنوان
حفاظت فوتوکاتوسی از آلیاژهای نیتروژن اکسید آهن بر روی فولاد کربن ساخته شده است
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فناوری نانو (نانو تکنولوژی)
چکیده انگلیسی


• The α-Fe2O3 nanotube prepared via anodic etching.
• Electrochemical cathodic protection was test in 0.5 wt.% NaCl solution.
• Corrosion rate of α-Fe2O3 nanotube was less than that of carbon steel.

The carbon steel (CS) was anodized to coat with vertical arrays of nanotubes in a mixture of aqueous ammonium fluoride solution and ethylene glycol. As-anodized specimens were annealed at 450 °C for 4 h in Ar ambient. The fabricated iron oxide nanotube arrays (NTA) depicted a layer of nanotubes over 500 nm in length, about 80 nm in diameter and about 30 nm in wall thickness shown from scanning electron microscope images. X-ray diffraction pattern indicated that iron oxide NTA contained α-Fe2O3 as the main phase and Fe3O4 as the secondary phase. UV–visible absorption spectra revealed iron oxide NTA significantly absorbed light up to 700 nm. Potentiodynamic polarization curves of iron oxide NTA and CS were investigated in 0.5 wt.% NaCl solutions in the dark and under illumination supplied by solar simulator. We found that iron oxide NTA shows tremendous photoeffect under alternative illumination and dark. It was seen that potential of iron oxide NTA was more negative under illumination than in the dark and the corrosion rate of CS covered with NTA was obviously less than undecorated CS. In addition, the model of photoelectrochemical anticorrosion of iron oxide NTA was explored.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 266, 25 March 2015, Pages 183–187
نویسندگان
, , , ,