کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1659325 1517682 2010 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Indentation hardness of rough surfaces produced by plasma-based ion implantation processes
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
Indentation hardness of rough surfaces produced by plasma-based ion implantation processes
چکیده انگلیسی
The thickness of layers produced by plasma based ion implantation (PBII) range from nano to micrometers. Consequently, mechanical properties of such layers demand the use of instrumented indentation (II). However, PBII processes promote roughness, which has strong influence on the reliability of hardness and elastic modulus measurements. In the present study, hardness was obtained by two different methods using II data from rough surfaces: the usually adopted Oliver-Pharr method and the one proposed by Malzbender, which is based on the mechanical energies during indentation tests. Both methods were applied to a reference material (soda-lime glass) with different surface textures, as well as for a rough Ti surface prepared by glow discharge nitriding. The Malzbender method is well consistent with the Oliver-Pharr one, however the methods equally presented significant scattering in hardness values for the rough surfaces. Tip-asperities interactions generate errors in the determination of penetration depth. The tip-surface contact was corrected by using a simple methodology based on the contact stiffness analysis. Hardness was recalculated after the correction and the new profiles were representative for a nitrided-PBII titanium surface.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 204, Issues 18–19, 25 June 2010, Pages 3013-3017
نویسندگان
, , , ,