Characteristics of a fast low-temperature zinc phosphating coating accelerated by an ECO-friendly hydroxylamine sulfate

A fast low-temperature phosphating processing accelerated by an ECO-friendly hydroxylamine sulfate (HAS) is developed. The zinc phosphate coating was fast formed on high-carbon steel in a low-temperature phosphating bath. Growth stages and characteristics of the phosphate coating were investigated by open circuit potential (OCP), SEM, EDS and XRD techniques. The phosphating process can be divided into three stages, namely amorphous precipitation, anodic depolarization and growth of phosphate coating. The phosphate coating consists of Zn3(PO4)2 · 4H2O and Zn2Fe(PO4)2 · 4H2O phases. The addition of HAS makes the three stages' time shorten to 53%, 31% and 50%, respectively, while markedly reduces the size of phosphate crystals from 100 µm to about 50 µm, and increases the Zn2Fe(PO4)2 · 4H2O content from 30% to 44% in the coating. HAS would be widely used as a low-temperature phosphating accelerator to replace the traditional nitrite, due to its less pollutant, higher phosphating rate and better quality of the coating.