Improvement of physical properties of Cu-infiltrated W compacts via electroless nickel plating of primary tungsten powder

In the present research, tungsten particles were coated using nickel/nickel–phosphorus electroless plating technique. The coated tungsten powders were pressed under constant pressure to achieve compact material of cylindrical shape with same porosity. Then, attained compacts were infiltrated/penetrated by liquid copper under the hydrogen atmosphere in order to obtain W–15 wt.% Cu composites. The coated/uncoated powders as well as its infiltrated compacts were characterized by optical microscopy (OM) as well as scanning electron microscopy (SEM), EDS and XRD methods. The microstructure, relative density and specific resistivity of composites were compared. The microstructural observations revealed that the infiltration behavior can be improved in the compacts prepared by both nickel and nickel–phosphorus coated tungsten powders, in comparison with uncoated ones. In addition, it was found that relative density may be raised from < 85% to > 95% by nickel electroless plating, that leads to decrease specific resistivity from 6 to 4 µΩ cm. Enhancement of electrical conductivity of infiltrated W–15 wt.% Cu compacts prepared by electroless nickel coated tungsten powders was related to its higher density.