کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1660740 | 1008411 | 2009 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Formation of WC-iron silicide (Fe5Si3) composite clad layer on AISI 316L stainless steel by high power (CO2) laser
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
An attempt was made to produce WC-iron silicide cladded layer on AISI 316L stainless steel by laser processing to obtain high hardness and lesser variations in hardness distribution in the layer. Different compositions of coating materials (WC, Si and Ni) and laser processing parameters were used. A good and defect free cladded layer of WC-iron silicide was obtained for an energy density of 22.5Â J/mm2 and coating composition of 40WC-40Si-20Ni (wt.%). The layer exhibited average hardness of about 883Â HV with lesser variations in the hardness distribution and also higher wear resistance compared to the substrate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 203, Issue 12, 15 March 2009, Pages 1618-1623
Journal: Surface and Coatings Technology - Volume 203, Issue 12, 15 March 2009, Pages 1618-1623
نویسندگان
A. Viswanathan, D. Sastikumar, Harish Kumar, A.K. Nath,