Fabrication of nano-sized oxide composite coatings and photo-electric conversion/electron storage characteristics

Titanium dioxide TiO2 can be used as a photo-anode to give generated electrons to the metal substrate under illumination. The transition metal oxide such as iron oxide Fe2O3 can be used to store electrons generated by the photo-electric conversion function of TiO2 under the illuminated situation while the electrons are discharged from the transition metal oxide to the metal substrate in the dark. In this paper, coatings of nano-sized composite of TiO2 and Fe2O3 were fabricated by the Warm Spray process, in which the feedstock powder is accelerated by a supersonic gas jet with speed above 1.0 km s- 1 and temperature between 800 and 2500 K, and then impacted onto the target substrate continuously to form coatings. The coatings of TiO2 and Fe2O3 nano-composite fabricated by Warm Spray showed no thermal deterioration such as phase transformation and particle growth of the feedstock during the spray process. The coatings fabricated by the Warm Spray had larger photo-current and the electron charge/discharge capacity than that by a conventional HVOF process. In addition, these characteristics were improved by decreasing the primary particle size of TiO2 and Fe2O3.