Nanometer-scale heat-conductivity measurements on biological samples

With semiconductor structures reaching the nanometer scale, heat conductivity measurements on the mesoscopic range of some tens of nanometers become an increasingly important aspect for the further improvement in digital processing and storage. Also the attempt to use atomic-force microscopy (AFM) technology for high-density data storage by writing information bits as nanometer-sized indentations into a polymer substrate with a heated cantilever tip asks for a careful investigation of the nano-scale heat-conductivity properties of polymers. Furthermore, in many AFM imaging applications, heat conductivity can provide additional information about the material the imaged structures consist of. In this respect, heat conductivity can also become very interesting in studies of usually quite heterogeneous biological samples, if the resolution can attain the nanometer range. In standard scanning thermal microscopy application, the tip forms a thermocouple, which precludes high-resolution imaging, as thermocouples cannot be made sufficiently small. In this paper, which focuses on biological applications, we demonstrate that by using an ultra sharp AFM cantilever with a Joule heating element above the tip structure different molecular components can be distinguished thanks to their different heat-conductivity properties. In this case, the resolution is determined by the actual tip size, and it can reach 10 nm.