کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1679379 | 1010260 | 2014 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Improvement in formability by control of temperature in hot stamping of ultra-high strength steel parts
ترجمه فارسی عنوان
بهبود شکل پذیری با کنترل درجه حرارت در مهر و موم داغ قطعات فولادی فوق العاده بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
مهر زنی داغ، ورق فلز، کنترل دما
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
The formability in hot stamping of an ultra-high strength steel part was improved by preventing a temperature drop of the flange increasing resistance to drawing. The temperature drop was reduced by high speed forming using a servo press and by less contact with a die and blankholder using spacers thicker than the sheet. In addition, hardening of the flange was prevented by slow cooling for the less contact using the spacers to facilitate trimming of the hot-stamped part. From a hot deep drawing experiment with a hemispherical punch, the effectiveness of the present approaches of temperature control was demonstrated.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Manufacturing Technology - Volume 63, Issue 1, 2014, Pages 301–304
Journal: CIRP Annals - Manufacturing Technology - Volume 63, Issue 1, 2014, Pages 301–304
نویسندگان
Tomoyoshi Maeno, Ken-ichiro Mori, Takaaki Nagai,