کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1679497 | 1518427 | 2015 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Laser-assisted milling—Process modeling and experimental validation
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Due to their advantageous material properties, components made from titanium alloys, such as TiAl6V4, are used predominately in the aerospace industry. However, the cost-effectiveness of machining operations is limited by high production times and costs. Laser-assisted milling represents a method to enhance productivity in comparison to conventional milling. This paper presents a novel processing strategy and a simulation based model of this hybrid process. The developed model is validated by investigating cutting forces and tool wear. The identified material removal rates provide a basis for a cost-analysis. A calculation of a use case showed that laser-assisted milling is an economical alternative to conventional milling.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Journal of Manufacturing Science and Technology - Volume 8, January 2015, Pages 70–77
Journal: CIRP Journal of Manufacturing Science and Technology - Volume 8, January 2015, Pages 70–77
نویسندگان
Robert Wiedenmann, Michael F. Zaeh,