Discharge characteristic of nanosecond-pulse DBD in atmospheric air using magnetic compression pulsed power generator

Dielectric barrier discharge driven by repetitive nanosecond pulses can offer highly efficient non-thermal plasma at atmospheric pressure and is widely used for plasma applications. In this paper, the discharge is generated using a compact pulsed power generator based on one-stage magnetic compression. The output pulse can be up to 30 kV with a rise time of about 40 ns and a full width at half maximum of 70 ns. The electrical characteristics of the discharge parameters are studied by the measurement of voltage and current waveforms. The effects of applied voltage amplitude, voltage polarity, pulse repetition frequency, and barrier dielectric on discharge characteristics are investigated, respectively. The experimental results show that the discharge current, discharge power and electron density increase with the increase of the applied voltage, and the pulse repetition frequency has a slight effect on the electrical parameters. Moreover, the discharge current is influenced by the dielectric barrier, but it is not varied with the polarity of applied pulses.

► A compact magnetic compression pulsed power is used to drive a dielectric barrier discharge.
► Homogeneous nanosecond-pulse discharge can be obtained in atmospheric air.
► Some parameters including voltage across air gap, discharge current, discharge power and electron density are calculated.
► The effects of applied voltage pulse amplitude, voltage polarity, pulse repetition frequency, and barrier dielectric on discharge characteristics are investigated.