Design and control of an apple harvesting robot

A robotic device consisting of a manipulator, end-effector and image-based vision servo control system was developed for harvesting apple. The manipulator with 5 DOF PRRRP structure was geometrically optimised to provide quasi-linear behaviour and to simplify the control strategy. The spoon-shaped end-effector with the pneumatic actuated gripper was designed to satisfy the requirements for harvesting apple. The harvesting robot autonomously performed its harvesting task using a vision-based module. By using a support vector machine with radial basis function, the fruit recognition algorithm was developed to detect and locate the apple in the trees automatically. The control system, including industrial computer and AC servo driver, conducted the manipulator and the end-effector as it approached and picked the apples. The effectiveness of the prototype robot device was confirmed by laboratory tests and field experiments in an open field. The success rate of apple harvesting was 77%, and the average harvesting time was approximately 15 s per apple.

► The robot consisted of a manipulator, end-effector and image-based vision servo control system.
► The manipulator with 5 DOF PRRRP structure was geometrically optimised to simplify control.
► Spoon-shaped end-effector with pneumatic actuated gripper designed to harvest apple.
► Fruit recognition algorithm based on support vector machine was applied to detect apple.
► Apple harvesting success rate in the field was 77%, and the average harvesting time was 15 s per apple.