In vessel neutron instrumentation for sodium-cooled fast reactors: Type, lifetime and location

The in vessel instrumentation of sodium-cooled fast reactors must deliver measurements that are reliable and easy to interpret over several reactor cycles in order to fulfill the safety requirements. This paper compares, with respect to this requirement, three types of detectors that are widely used in neutron measurements: fission chambers, boron-lined proportional counters, self-powered neutron detectors. We use neutron spectra that are computed for preliminary design of sodium-cooled fast reactor in different representative locations: in diluting tubes within nuclear fuel assemblies, or in the lateral neutron protections. With an evolution code, we compute the expected signal for each type of detector, to assess whether its level is sufficient, and also its evolution over three operating cycles, to examine whether it is compatible with long term measurements. The conclusion is that fission chambers are the only type able to deliver an interpretable signal for a wide dynamic of reactor power and for three or more operating cycles. The two other types are shown to be inadequate.