Methodology for developing channel disassembly criteria under severe accident conditions for PHWRs

This paper presents a methodology to develop a model for disassembly of the coolant channels in Pressurized Heavy Water Reactors under severe accident conditions. This model gives criteria to decide when under severe accident condition coolant channels will rupture due to deterioration in material properties at high temperatures and increase in load due to creep sag of channels above it and hence get disassembled. Presently available severe accident codes use simplistic and optimistic criteria based on a predefined temperature to predict failure of fuel channels and an explicit criterion for disassembly of the channel is not covered. The coolant channel disassembly model developed in this paper is based on modeling the sag and pile up of channels. A uniform temperature along the length of the channel is assumed. The disassembly of the channel is assumed when the total strain at any location exceeds the failure strain for a given temperature. A 3D failure surface which is a plot of time to failure, temperature of the calandria tube and load on the calandria tubes (on account of no of channels piled up) is developed. This failure surface can be used as an input to severe accident codes to predict the progress of the core disassembly. A set of failure surfaces is recommended to be used if metal–water reaction on the outer surface is to be accounted for loss in ductility due to metal water reaction. The temperature transient of the calandria tube for a severe accident obtained from system thermal hydraulic codes can be mapped onto the failure surface. The time at which the mapped transient crosses the failure surface gives the time at which the calandria tube is disassembled. This disassembly model is an engineered model which is much more realistic as compared to the current temperature based conservative model for predicting severe accident progression.

► Reactor coolant channel disassembly and its progression in PHWR systems are complex phenomena.
► This paper for the first time developed a phenomenological model for the reactor coolant channel disassembly scenario.
► A set of data is generated to predict the channel disassembly under any transient experienced during SA conditions.
► Material properties at elevated temperatures are proprietary. Therefore only the methodology to predict the disassembly of channel is presented.
► Channel disassembly means that the coolant channel leaves its original position by sagging and finally ruptures because of high strain.