کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1729363 | 1521167 | 2011 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The importance of uncertainties in the ROP detector layout design process for CANDU reactors
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
مهندسی انرژی و فناوری های برق
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: The importance of uncertainties in the ROP detector layout design process for CANDU reactors The importance of uncertainties in the ROP detector layout design process for CANDU reactors](/preview/png/1729363.png)
چکیده انگلیسی
In CANDU® reactor design, the regional overpower protection (ROP) systems protect the reactor against overpower in the fuel which could reduce the safety margin-to-dryout. The increase in fuel power could be caused by a localized power peaking within the core (for example, as a result of a certain reactivity device configuration) or a general increase in the core power level during a slow-loss-of-regulation (SLOR) event. This overpower could lead to fuel sheath dryout. In the CANDU® 600Â MW (CANDU 6) design, there are two ROP systems in the core, one for each fast-acting shutdown system. Each ROP system includes a number of fast-responding, self-powered flux detectors suitably distributed throughout the core within vertical and horizontal assemblies. A new methodology for designing the detector layout for the ROP system, called the DETPLASA algorithm, has been developed recently. This method utilizes the simulated annealing (SA) technique to optimize the placement of the detectors in the core. The evaluation of the trip setpoint (TSP) corresponding to each detector layout configuration (i.e., each history in the SA algorithm) is performed probabilistically using the ROVER-F code. In this evaluation, there are uncertainties related to both the detector components (i.e., related to the margin-to-trip) and to the fuel channel components (i.e., related to the margin-to-dryout). In this paper, the importance of these uncertainties on the outcome of the detector layout optimization process is evaluated. Some parametric studies have been performed to quantify the effect of uncertainties on the resulting detector layout. Two types of investigations have been performed. First, a given detector layout will be used to explicitly determine the effect of changing the uncertainty values. In this study, 343 sets of uncertainty values are used to produce the corresponding TSP values. The variation in the TSP values is analyzed. Second, three sets of uncertainty values (a subset of uncertainties from the first study) are used in independent DETPLASA executions. The resulting detector layout configurations will be examined to observe the effect of these uncertainties on the final design. Results from these investigations are presented in this paper.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Annals of Nuclear Energy - Volume 38, Issue 4, April 2011, Pages 775-780
Journal: Annals of Nuclear Energy - Volume 38, Issue 4, April 2011, Pages 775-780
نویسندگان
Doddy Kastanya,