Development, computer simulation and performance testing in sodium of an eddy current flowmeter

Sodium is used as a coolant in Liquid Metal Fast Breeder Reactor (LMFBR). Sodium flow measurement is of prime importance both from the operational and safety aspects of a fast reactor. Various types of flowmeters namely permanent magnet, saddle type and eddy current flowmeters are used in FBRs. From the safety point of view flow through the core should be assured under all operating conditions. This requires a flow sensor which can withstand the high temperature sodium environment and can meet the dimensional constraints and be amenable to maintenance. Eddy current flowmeter (ECFM) is one such device which meets these requirements. It is meant for measuring flow in PFBR primary pump and also at the outlets of the fuel sub-assemblies to detect flow blockage. A simulation model of ECFM was made and output of ECFM was predicted for various flowrates and temperatures. The simulation model was validated by testing in a sodium loop. This paper deals with the design, simulation and tests conducted in sodium for the eddy current flowmeter for use in the Prototype Fast Breeder Reactor (PFBR).