Neutron flux optimization in irradiation channels at NUR research reactor

Optimization of neutron fluxes in experimental channels is of great concern in research reactor utilization.The general approach used at the NUR research reactor for neutron flux optimization in irradiation channels is presented.The approach is essentially based upon a judicious optimization of the core configuration combined with the improvement of reflector characteristics.The method allowed to increase the thermal neutron flux for radioisotope production purposes by more than 800%. Increases of up to 60% are also observed in levels of useful fluxes available for neutron diffraction experiments (small angle neutron scattering (SANS), neutron reflectometry, etc.).Such improvements in the neutronic characteristics of the NUR reactor opened new perspectives in terms of its utilization. More particularly, it is now possible to produce at industrial scales major radio-isotopes for medicine and industry and to perform, for the first time, material testing experiments.The cost of the irradiations in the optimized configuration is generally small when compared to those performed in the old configuration and an average reduction factor of about of 10 is expected in the case of production of Molybdenum-99 (isotope required for the manufacturing of Technetium-99 medical kits).In addition to these important results, safety analysis studies showed that the more symmetrical nature of the core geometry leads to a more adequately balanced reactivity control system and contributes quite efficiently to the operational safety of the NUR reactor.Results of comparisons between calculations and measurements for a series of parameters of importance in reactor operation and safety showed good agreement.