Comparison between externally fired gas turbine and gasifier-gas turbine system for the olive oil industry

The olive oil industry generates during the extraction process several solid wastes as olive tree leaves and prunings, exhausted pomace and olive pits. These renewable wastes could be used for power and heat applications. The aim of this paper is to compare the performance of two small-scale CHP systems: a gasification- gas turbine system and an EFGT (externally fired gas turbine system). For this reason, several parameters have been calculated: generated heat and power, electric and overall efficiencies, biomass consumption, exergy efficiency, optimum pressure ratio, etc. These systems provide 30 kWe and about 60kWth. Simulation results show that the electrical and overall efficiencies achieved in EFGT system (19.1% and 59.3%, respectively) are significantly higher than those obtained in the gasification plant (12.3% and 45.4%). The proposed CHP systems have been modeled using Cycle-Tempo® software.

► Comparison between externally fired gas turbine and gasifier-gas turbine system.
► Olive oil industry generates several solid wastes as olive tree leaves and prunings.
► Thermodynamic parameters have been calculated.
► Systems have been modeled using Cycle-Tempo® software.
►  Simulation results show electrical and overall efficiencies achieved in the systems.