کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1734759 | 1016163 | 2011 | 9 صفحه PDF | دانلود رایگان |
In this study, a test system for spray cooling, in which the heating surface temperatures were simultaneously measured by thermocouples and an infrared imager, was set up. A mathematical model of spray cooling heat transfer characteristics was presented based on the fundamentals of dynamics and heat transfer. The temperature distribution on the heating surface was investigated by the experimental and theoretical methods, the surface temperature non-uniformity and its influencing factors were analyzed. The predictions by the model coincided with the experimental results well, and a comparison was demonstrated with a deviation below 10%. It can be concluded that the surface temperature non-uniformity is influenced by the spray characteristics, nozzle-to-surface distance, inlet pressure, heat flux, spray angle and the system pressure. In the case of the same heat flux, the surface temperature non-uniformity can be reduced by the small spray angle, low system pressure, low nozzle-to-surface distance, and the high inlet pressure.
Research highlights
► The temperature distribution on the heating surface was investigated by the experimental and theoretical methods, and a comparison was demonstrated with a deviation below 10%.
► The surface temperature non-uniformity is influenced by the spray characteristics, nozzle-to-surface distance, inlet pressure, heat flux, spray angle and the system pressure.
► Nozzle-to-surface distance, inlet pressure, and spray angle affect surface temperature non-uniformity all by changing the spray characteristics.
Journal: Energy - Volume 36, Issue 1, January 2011, Pages 249–257