کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1743531 | 1522024 | 2011 | 9 صفحه PDF | دانلود رایگان |
Previously, we developed a model to predict lean flammability limit L and flame propagation velocity Sb for pulverized coal. In the present paper, we have extended the model to apply it in development of oxy-fuel combustion systems. The basic model consists of two particles. One of the two particles burns first, then, the other particle is ignited by the heat of combustion of the one burning particle. We analyzed at what distance the first burning particle could ignite the next particle, and how fast the first burning particle could ignite the next particle. The model was verified both for air and oxy-fuel combustion conditions. Next, a method to support burner development was examined by using the model. Local Sb and L near the ignition points of the burner could be analyzed from the concentration and temperature profiles of CFD results. Flame stability was judged by the calculated Sb and L profiles, and past results of blow-off limits obtained with actual- and pilot-scale experiments. A DS®T-burner was developed by Hitachi Power Europe, and installed at the Schwarze Pumpe pilot plant. Combination of the technique and large eddy simulation was applied to confirmation of the system.
Journal: International Journal of Greenhouse Gas Control - Volume 5, Supplement 1, July 2011, Pages S111–S119