Non-isothermal flow of carbon dioxide in injection wells during geological storage

During sequestration, carbon dioxide within injection wells is likely to be in a dense state and therefore its weight within the wellbore will play an important role in determining the bottomhole pressure and thus the injection rate. However, the density could vary significantly along the well in response to the variation in pressure and temperature. A numerical procedure is formulated in this paper to evaluate the flow of carbon dioxide and its mixtures in non-isothermal wells. This procedure solves the coupled heat, mass and momentum equations with the various fluid and thermodynamic properties, including the saturation pressure, of the gas mixture calculated using a real gas equation of state. This treatment is particularly useful when dealing with gas mixtures where experimental data on mixture properties are not available and these must be predicted. To test the developed procedure two wellbore flow problems from the literature, involving geothermal gradients and wellbore phase transitions are considered; production of 97% carbon dioxide and injection of superheated steam. While these are not typical carbon dioxide injection problems they provide field observations of wellbore flow processes which encompass the mechanisms of interest for carbon dioxide injection, such as phase transition, temperature and density variations with depth. These two examples show that the developed procedure can offer accurate predictions. In a third application the role of wellbore hydraulics during a hypothetical carbon dioxide injection application is considered. The results obtained illustrate the potential complexity of carbon dioxide wellbore hydraulics for sequestration applications and the significant role it can play in determining the well bottomhole pressure and thus injection rate.