کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1744279 1522130 2016 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Variation in physical and mechanical properties of fired-clay bricks incorporating ETP biosolids
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
پیش نمایش صفحه اول مقاله
Variation in physical and mechanical properties of fired-clay bricks incorporating ETP biosolids
چکیده انگلیسی
This study was directed towards investigating the possibility of incorporating biosolids from Melbourne's Eastern Treatment Plant (ETP) in fired clay bricks. First, the mineralogical and chemical compositions as well as geotechnical characteristics of the ETP biosolids and brick soil were determined. Then, bricks were fabricated with five different percentages of ETP biosolids (5%, 15%, 25%, 35%, and 50%) by firing them at a temperature 1020 °C for 3 h. The effect of incorporating ETP biosolids in a ceramic body on the physical and mechanical properties of fired-bricks was assessed by shrinkage, weight loss on ignition (LOI), water absorption, density, initial rate of absorption (IRA), compressive strength, efflorescence, scanning electron microscopy (SEM), and leachate analysis. The compressive strength of biosolids amended bricks ranged from 24.9 to 37.0 MPa, which met the requirements of the Australian Standards. Moreover, bricks with ETP biosolids can save up to 25% of energy during the firing in an electric furnace, which is very important in terms of sustainable development. The leachate analysis results showed that the concentration of heavy metals leached is insignificant and much lower than the regulatory limits.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Cleaner Production - Volume 119, 15 April 2016, Pages 76-85
نویسندگان
, , , ,