The effect of post-irradiation annealing on the crosslinking of high-density polyethylene induced by gamma-radiation

Evidence of oxidation was found in all irradiated samples. The extent of oxidation depends on the initial crystallinity of the sample, the irradiation dose and the type of post-irradiation treatment. The heat of fusion measured in the annealed samples decreases with the gel content while the fusion temperature was slightly affected. Ductile or brittle behaviors were observed after testing specimens under tensile stress. The yield stress increases proportionally to the crystallinity level that, in turn, depends on the total dosage applied to the samples. The extensibility of ductile samples is determined by the amount of gel produced regardless of the degree of initial crystallinity and the type of annealing process applied to each sample.