کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
205505 461111 2016 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Experimental study of the two-stage injection process of fatty acid esters on a common rail injection system
ترجمه فارسی عنوان
بررسی تجربی فرایند تزریق دو مرحله ای استرهای اسید چرب در یک سیستم تزریق ریلی مشترک
کلمات کلیدی
بیودیزل، استر اسید چرب، ماتیل لاورات، متیل اولئات، اتیل اولئیت، تزریق دو مرحلهای
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی


• Two-stage injection processes of three fatty acid esters (FAE) were investigated.
• The injector inlet pressure and fuel mass injected per cycle were studied.
• Fuel effects on the main injection masses are dependent on injection pressure.
• Methyl and ethyl oleates have higher speeds of sound at low injection pressure.
• The pressure wave of diesel propagates faster than FAE at high injection pressure.

The two-stage injection processes of three fatty acid esters, methyl laurate, methyl oleate and ethyl oleate, were investigated and compared with that of fossil diesel using a high-pressure diesel engine common rail injection system. The injection characteristics studied included injector inlet pressure characteristics, and rate and quantity of fuel mass injected per cycle. The effects of fuel properties and injection dwell time between the pilot and main injection events were also considered. Differences in the fuel properties of diesel and fatty acid esters caused modest changes in the main injection quantities and fuel pressure fluctuation characteristics after the end of injection, and the changes were affected by different injection pressures. The injection dwell time was also found to influence the injector inlet pressure characteristics at the start of the main injection event and thus the amount of fuel injected during main injection was slightly changed.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel - Volume 163, 1 January 2016, Pages 214–222
نویسندگان
, , , , , ,