Transformations of pyrite during formation of metallurgical coke

The desulfurization of pyrite during the coking process leads to the formation of phases of varying size, shape and composition. The phases are represented mostly by Fe and S-bearing associations, which can be divided into two categories: those represented only by of Fe–S phases (three varieties), and aggregates containing both sulfides and almost pure iron. There are also Fe–O and Fe–S–O phases, which were probably formed after the coke was pushed from the coke oven. It is suggested that the formation of Fe and S-bearing associations can cause the appearance of cracks and cavities in the coke matrix, which, together with the pressure of the released SO2 gas, will detract from the strength of the coke. Large grains of pyrite can create weaker spots than do smaller ones, and the incomplete decomposition of pyrite will cause migration of the remaining part of the sulfur to the blast furnace, affecting the reactions there. This may be more common in cokes of relatively low porosity and small pore size and in those made from coals with large pyrite grains.