Experimental studies of bluff-body stabilized LPG diffusion flames

Bluff-body stabilized turbulent jet diffusion flame has received renewed attention in recent years due to its practical applications. An experimental study is carried out to investigate the effect of coaxial air velocity, Ua, and lip-thickness, δ of the bluff-body on the flame stability limits and emission levels. The stability limits of a typical diffusion flame can be characterized in terms of two parameters namely flame lift-off height and blow-off velocity. It is experimentally observed that lift-off height is not linearly dependent on the fuel exit velocity, Uf, as compared to the simple jet. The flame stability is found to be improved for larger lip-thickness bluff-body because of the presence of lower pressure in the wake region behind the bluff-body. Flame length is observed to be dominated by buoyancy and momentum regimes. The transition from buoyancy to momentum regime is found to be extended with increase in lip-thickness. It is also observed that the blow-off limit is also extended further by 10% as compared to simple jet diffusion flames under similar conditions. The emissions data are reported in terms of mass based emission index, EINOx (g [NOx]/kg [fuel]) for a wide range of flow conditions. It is concluded that the addition of coaxial air in the larger lip-thickness bluff-body flames causes a marginal reduction in emission levels relative to smaller lip-thickness bluff-body.