Gas turbine combustion performance test of hydrogen and carbon monoxide synthetic gas

The development of coal IGCC (Integrated Gasification Combined Cycle) technology has made it possible to exploit electricity generated from coal at a low cost. Furthermore, IGCC is a pre-requisite for the development of CCS (Carbon Capture and Storage) technology and hydrogen generated from coal. To achieve the need to reduce CO2 emissions, Korea’s 300 MW IGCC RDD&D (Research Development, Demonstration and Dissemination) project was launched in December 2006 under the leadership of the Korea Electric Power Corporation (KEPCO), with the support of the Korea Ministry of Knowledge Economy.When a new fuel is adapted to a gas turbine (such as syngas for IGCC), it is necessary to study the gas turbine combustion characteristics of the fuel, because gas turbines are very sensitive to its physical and chemical properties. This experimental study was conducted by investigating the combustion performance of synthetic gas, which is composed chiefly of hydrogen and carbon monoxide. The results of a test on synthetic gas combustion performance were compared with the results of methane combustion, which is a major component of natural gas. The results of the combustion test of both gases were examined in terms of the turbine’s inlet temperature, combustion dynamics, emission characteristics, and flame structure.From the results of this experimental study, we were able to understand the combustion characteristics of synthetic gas and anticipate the problems when synthetic gas rather than natural gas is fuelled to a gas turbine.