Computational studies of turbulent premixed flame based dump combustor

The present work reports the computational studies of turbulent premixed flame based dump combustor. The effects of various flow parameters such as inlet Reynolds number, inlet turbulence intensity and expansion ratio on important flow quantities like axial velocity, turbulent kinetic energy and turbulent dissipation rate have been studied extensively. It was found out that the axial velocities and the radial velocities within the flowfield are many times higher as compared to the cold flow case due to the heat release and volumetric expansion. The reattachment length for the reacting flow case is found to be lower than that of the cold flow cases due to higher recirculation velocities. A maximum reduction of 64.6% compared to the cold flow reattachment length was observed in the case of turbulence intensity, I = 10%, equivalence ratio, ϕ = 1.00 with an expansion ratio of 2. In contrast, minimum of 41.51% reduction in recirculation length was observed in the case of I = 5%, ϕ = 0.5 for the same expansion ratio. This reduction was quite significant at higher inlet turbulence intensities and at higher equivalence ratios.