Development of sustained and dual drug release co-extrusion formulations for individual dosing

• Co-extrudates for the Solid Dosage Pen were developed, prepared and characterized.
• A strategy for selection of appropriate coat and core formulations is presented.
• Tailored dissolution kinetics was achieved with dual- and sustained release.
• Dose-dependency of sustained drug release was minimized by applying a wax-coat.
• Individual dosing via the Solid Dosage Pen was feasible.

In personalized medicine and patient-centered medical treatment individual dosing of medicines is crucial. The Solid Dosage Pen (SDP) allows for an individual dosing of solid drug carriers by cutting them into tablet-like slices.The aim of the present study was the development of sustained release and dual release formulations with carbamazepine (CBZ) via hot-melt co-extrusion for the use in the SDP. The selection of appropriate coat- and core-formulations was performed by adapting the mechanical properties (like tensile strength and E-modulus) for example. By using different excipients (polyethylene glycols, poloxamers, white wax, stearic acid, and carnauba wax) and drug loadings (30–50%) tailored dissolution kinetics was achieved showing cube root or zero order release mechanisms. Besides a biphasic drug release, the dose-dependent dissolution characteristics of sustained release formulations were minimized by a co-extruded wax-coated formulation. The dissolution profiles of the co-extrudates were confirmed during short term stability study (six months at 21.0 ± 0.2 °C, 45% r.h.).Due to a good layer adhesion of core and coat and adequate mechanical properties (maximum cutting force of 35.8 ± 2.0 N and 26.4 ± 2.8 N and E-modulus of 118.1 ± 8.4 and 33.9 ± 4.5 MPa for the dual drug release and the wax-coated co-extrudates, respectively) cutting off doses via the SDP was precise. While differences of the process parameters (like the barrel temperature) between the core- and the coat-layer resulted in unsatisfying content uniformities for the wax-coated co-extrudates, the content uniformity of the dual drug release co-extrudates was found to be in compliance with pharmacopoeial specification.

Figure optionsDownload high-quality image (282 K)Download as PowerPoint slide