کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
208827 | 461273 | 2005 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: CO2 capture using some fly ash-derived carbon materials CO2 capture using some fly ash-derived carbon materials](/preview/png/208827.png)
Adsorption is considered to be one of the more promising technologies for capturing CO2 from flue gases. For post-combustion capture, the success of such an approach is however dependent on the development of an adsorbent that can operate competitively at relatively high temperatures. In this work, low cost carbon materials derived from fly ash, are presented as effective CO2 sorbents through impregnation these with organic bases, for example, polyethylenimine aided by polyethylene glycol. The results show that for samples derived from a fly ash carbon concentrate, the CO2 adsorption capacities were relatively high (up to 4.5 wt%) especially at high temperatures (75 °C), where commercial active carbons relying on physi-sorption have low capacities. The addition of PEG improves the adsorption capacity and reduces the time taken for the sample to reach the equilibrium. No CO2 seems to remain after desorption, suggesting that the process is fully reversible.
Journal: Fuel - Volume 84, Issue 17, December 2005, Pages 2204–2210