Performance enhancement of a pulse detonation rocket engine

Utilizing liquid kerosene as the fuel, oxygen as oxidizer and nitrogen as purge gas, a series of multi-cycle detonation experiments was conducted to improve the performance of pulse detonation rocket engine (PDRE). In order to improve the performance of the engine, it is crucial to develop an effective DDT enhancement device with less flow loss and higher survival in hostile detonation tube; therefore, three spiraling internal grooves were tested. The three spiraling internal grooves were semicircle, square and inversed-triangle grooves, respectively. The results showed that the spiraling internal groove can effectively enhance DDT and prolong the operation time of PDRE. The effect of groove shape on thrust enhancement of PDRE and the optimum length of spiraling groove were then investigated. To improve the detonability of liquid kerosene and prolong the durability of PDRE, experiments on the kerosene preheating based on active cooling were conducted. The results demonstrated that with the aid of fuel preheating, the detonation initiation time for liquid kerosene was noticeably reduced and a fully-developed detonation wave was achieved in the position away from igniter 4.67 times the diameter of the detonation tube. By adding the additive to liquid kerosene, the detonation initiation time from 0.75 ms decreased to 0.34 ms and the detonability of fuel was dramatically improved. Finally, experiments were conducted to investigate the effects of the operating frequency on the detonation parameters, the fill fraction and PDRE performance. The results indicated that detonation pressure and temperature vary with the operating frequency of PDRE, and the fill fraction has a significant influence on the specific impulse of PDRE. With the strategy of partial filling in detonation tube, the specific impulse can be remarkably enhanced.