|کد مقاله||کد نشریه||سال انتشار||مقاله انگلیسی||ترجمه فارسی||نسخه تمام متن|
|6478075||1427916||2017||8 صفحه PDF||سفارش دهید||دانلود رایگان|
Flame-wall interactions (FWI) of a turbulent side-wall quenching (SWQ) V-flame is characterized by planar laser diagnostics. Velocities and flame front positions are measured simultaneously by two-component particle image velocimetry (PIV) and planar laser induced fluorescence (PLIF) of the OH radical. Flame surface density and reactive flame surface density are derived from experimental data and evaluated in a physical and flame progress variable domain. The impact of the wall on flame structures is clearly observed. Additionally mean reaction rates are derived using both flame surface densities and a wall-influenced local consumption speed. Approaching walls reaction rates strongly decrease. Reaction rates are important for quantifying incomplete combustion near walls and impose a challenge for improved modeling approaches in numerical flame simulations. These experimental results are compared to previous direct numerical simulation (DNS) studies and flame surface density models from literature. Despite different Reynolds-numbers overall a good agreement between experimental data and modeling results is achieved. This is an indication that simplified chemical kinetic modeling in DNS is sufficient for representing kinematics of turbulent flames near walls.
Journal: Proceedings of the Combustion Institute - Volume 36, Issue 2, 2017, Pages 1827-1834