Combustion processes for carbon capture

A review of the technologies for coal-based power generation closest to commercial application involving carbon capture is presented. Carbon capture and storage (CCS) developments are primarily adaptations of conventional combustion systems, with additional unit operations such as bulk oxygen supply, CO2 capture by sorbents, CO2 compression, and storage. They use pulverized coal combustion in entrained flow—the dominant current technology for coal-based power, or gasification in entrained flow, although similar concepts apply to other solid–gas contacting systems such as fluidized beds. Currently, the technologies have similar generation efficiencies and are associated with efficiency penalties and electricity cost increases due to operations required for carbon capture. The R&D challenges identified for the combustion scientist and engineer, with current understanding being detailed, are those of design, optimisation and operational aspects of new combustion and gasification plant, controlling the gas quality required by CCS related units and associated emission compliance, and gas separations. Fundamental research needs include fuel reactions at pressure, and in O2/CO2 atmospheres, as few studies have been made in this area. Laboratory results interpreted and then included in CFD models of combustion operations are necessary. Also identified, but not detailed, are combustion issues in gas turbines for IGCC and IGCC-CCS. Fundamental studies should be a component of pilot-plant and demonstrations at practical scale being planned. Concepts for new designs of combustion equipment are also necessary for the next generation of technologies. The challenges involved with the design and operation of these integrated systems, while supplying electricity on demand, are considerable.