Combustion characteristics in a supersonic combustor with hydrogen injection upstream of cavity flameholder

Combustion characteristics in a supersonic combustor with hydrogen injection upstream of a cavity flameholder were investigated both experimentally and numerically. The combustion was observed to be stabilized in the cavity mode around the shear layer via a dynamic balance and then spread into the main stream in the region around the jet centerplane where the flow was decelerated and turned to the main stream, supplying a favorable condition for the combustion to spread. The combustion spreading from the cavity shear layer to the main stream seemed to be dominated not only by the traditional diffusion process but also by the convection process associated with the extended recirculation flows resulting from the heat release and the interaction between the jet and the cavity shear layer. Therefore, the cavity-stabilized combustion appeared to be a strongly coupled process of flow and heat release around the cavity flameholder.