A novel apparatus for flame spread study

One of the challenges in the experimental study of flame spread is that, even if the flame spreads at a steady rate, the propagating flame creates an unsteady phenomenon with respect to the laboratory frame of reference. As a result, only a few studies have been done where the detailed flame structure has been experimentally measured along with the spread rates. In this work, we demonstrate the feasibility of a new flame spread apparatus that moves the fuel in the opposite direction of the flame so as to keep the leading edge of the flame stationary with respect to the laboratory. A thermocouple, fixed to the laboratory frame of reference, in front of the leading edge of the flame, senses the presence of the flame and a PID controller keeps the set point temperature constant by moving the sample holder, driven by a stepper motor, in the opposite direction at the velocity of the spread. Unlike conventional studies, this apparatus, called the flame stabilizer, produces real time spread rate with a time resolution of 0.3 s. In this paper, instantaneous flame spread rate and the visible flame structure are compared between a downward spreading flame and the corresponding stabilized flame for spread over ashless filter paper. The results indicate that the difference between the two configurations are within experimental uncertainties and the stabilized flame can represent a spreading flame adequately, including variability of flame spread rate and the flame geometry, for further observations.