Thermography as a technique for monitoring early age temperatures of hardening concrete

The exothermal character of cement hydration reactions causes concrete to endure temperature changes during the first days after casting, with associated volumetric deformations that may induce undesired cracking. The capability to predict temperature evolution in concrete since casting is thus important to back decisions that avoid detrimental thermal cracking in concrete structures. Even though several approaches exist to model the early age behavior of concrete, the laboratory or in situ verification of numerical predictions is scarce, and mostly done with embedded temperature sensors, with limited sampling points. The present research intends to evaluate the performance of the thermography technique in the continuous monitoring of surface temperatures of a hydrating 0.40 × 0.40 × 0.40 m3 concrete cube, in which embedded thermal sensors are also used. By using thermography, simultaneous monitoring of the visible surfaces of the specimen is possible, thus providing comprehensive information regarding the evolution of surface temperatures. The temperatures monitored with the thermography, as well as with the embedded temperature sensors, are finally used as a benchmark example for validation of a 3D finite element numerical code for thermal analysis developed by the authors. The use of thermography images for validation of finite element results is rather more advantageous than the use of standard single point temperature measurements, in view of the large facility and wide range of comparison provided by the simultaneous visualization of temperature surface color maps (measured and simulated).

► Use of a thermography camera for monitoring temperature in concrete at early ages.
► Experiment on a 40 cm × 40 cm × 40 cm concrete cube.
► Simultaneous monitoring with thermography and embedded thermocouples.
► Finite element simulation of temperature evolution (3D).
► Successful comparison between monitoring techniques and numerical simulation