Development of the supervisory systems for the ITER diagnostic systems in JADA

• JADA designed the supervisory system for the ITER diagnostic systems.
• The conversion tool from SFC to EPICS records source codes was proposed.
• The configuration protocol for the diagnostic systems and the validation function were proposed.
• The supervisory system will be implemented and be validated in 2013.

In ITER, it is important how the CODAC system conducts many plant systems including diagnostic systems. In order to establish necessary communications between the diagnostics systems and the CODAC system, Japan domestic agency (JADA) has proposed the new concept of supervisory system for the diagnostic system based on our experiences in operating plasma diagnostic systems. The supervisory system manages operation sequences, current state and configuration parameters for the measurement. JADA designed the supervisory system satisfying the requirements from both CODAC system and diagnostic systems. In our design, the tool which converts operational steps described as flowcharts into the EPICS (experimental physics and industrial control system) records source codes is introduced. This tool will ensure reduction of the system designers’ efforts. We designed a communication protocol to configure measurement parameters and proposed configuration parameter validation function. We also analyzed the management of the central/local control mode for the diagnostic systems. The function which selects the adequate limit values and consistency check algorithms in accordance with the conditions of the diagnostics system is proposed. JADA will develop a prototype of the supervisory system and validate the design in 2013.