Progress of He-cooled divertor development for DEMO

A He-cooled divertor concept for DEMO [1] has been developed at Karlsruhe Institute of Technology (KIT) since a couple of years with the goal of reaching a heat flux of 10 MW/m2 anticipated for DEMO. The reference concept HEMJ (He-cooled modular divertor with multiple-jet cooling) is based on the use of small cooling fingers – each composed of a tungsten tile brazed to a tungsten alloy thimble – as well as on impingement jet cooling with helium at 10 MPa, 600 °C. The cooling fingers are connected to the main structure of ODS Eurofer steel by brazing in combination with a mechanical interlock. This paper reports progress to date of the design accompanying R&Ds, i.e. primarily the fabrication technology and HHF experiments. For the latter a combined helium loop and electron beam facility (200 kW, 40 keV) at Efremov Institute, St. Petersburg, Russia, has been used. This facility enables mock-up testing at a nominal helium inlet temperature of 600 °C, a pressure of 10 MPa, and a maximal pressure head of 0.5 MPa. HHF test results till now confirm well the divertor design performance. In the recent test series in early 2010 the first breakthrough was achieved when a mock-up has survived over 1000 cycles at 10 MW/m2 unscathed.