Detailed nuclear analysis of ITER ELM coils

The ELM coils in ITER are intended to provide control of Edge Localized Modes (ELMs). These coils are located on the outboard side of ITER between the shield modules and vacuum vessel (VV) and are subject to high radiation levels. Detailed three-dimensional (3-D) models of the toroidal and poloidal legs of the ELM coil and surrounding region for the MCNP code were updated to reflect the latest design changes. Neutronics calculations were performed to determine a variety of radiation damage parameters for the ELM coils as well as the VV located behind them. Additionally, detailed CAD based models for the upper ELM coil region were used to perform a CAD based analysis using the DAG-MCNP5 code. The results show that the ELM coil will meet the specified material radiation limits. However, the nuclear heating on the vacuum vessel behind the poloidal multi-pipe manifolds will exceed the specified limit.