Study of ceramic pebble beds in Post Irradiation Examination of the Pebble Bed Assemblies irradiation experiment

The irradiation experiment Pebble Bed Assemblies (PBA) consists of four mock-up representations (test elements) of the EU Helium Cooled Pebble Bed (HCPB) concept. The four test elements contain a ceramic breeder pebble bed sandwiched between two beryllium pebble beds and are regarded as one of the first DEMO representative HCPB blanket irradiation tests, with respect to temperatures and power densities. The design value of the PBA were to irradiate pebble beds at a power density of 20–26 W/cc in the ceramic breeder, to a maximum temperature of 800 °C.Two test elements contain lithium orthosilicate pebbles (Li4SiO4; FZK/KIT) and were irradiated with target temperatures of 600 and 800 °C, respectively. The other test elements have lithium metatitanate (Li2TiO3; CEA) with different grain sizes and were both irradiated with a target temperature of 800 °C. The PBA have been irradiated for 294 Full Power Days (12 cycles) in the High Flux Reactor (HFR) in Petten to a total neutron dose of 2–3 dpa in Eurofer, and an estimated (total) lithium burnup of 2–3% in the ceramic pebbles.This work presents results of Post Irradiation Examinations (PIE) on the four HCPB test elements. Using e.g. SEM, the evolution of compressed pebble beds and pebble interactions like swelling, creep, sintering, etc., under irradiation and thermal loads are studied for the candidate pebble materials Li2TiO3 and Li4SiO4. (Chemical) interactions between ceramic pebbles and Eurofer (e.g. chrome diffusion) are observed. Looking at different sections of the pebble beds, correlations between temperatures and thermal–mechanical behaviour are clearly observed.

► Irradiation test of ‘TBM-like mock-up’ under DEMO relevant power densities.
► SEM analysis of ‘mock-up’ cross sections.
► Ceramics pebble bed behaviour; sintering/cracking.
► Ceramics pebble interaction with Eurofer-97 containment.