Numerical evaluation of a granular column reinforced by geosynthetics using encasement and laminated disks

Structures built on soft strata may experience substantial settlement, large lateral deformation of the soft layer and global or local instability. Granular columns reinforced by geosynthetic materials reduce settlement and increase the bearing capacity of the composite ground. Reinforcement is more common in the form of geosynthetic encasement, but laminated disks can also be used. This paper compares these two forms of reinforcement by means of unit cell finite element analyses. Numerical results were initially validated using field and experimental data, and parametric studies were subsequently performed. The parametric studies varied the geosynthetic interval and the geosynthetic tensile stiffness of the laminated disks as well as the length of the reinforced column. The analyses showed that in both modes; encasement and laminated disks; the geosynthetic increases the vertical stress mobilized on the reinforced column and reduces settlement on soft soil. It was also observed that in order to achieve the same performance as with encased column, the optimum interval between laminated disks is dependent on the stiffness of the geosynthetics and the column reinforced length.