|کد مقاله||کد نشریه||سال انتشار||مقاله انگلیسی||ترجمه فارسی||نسخه تمام متن|
|296085||511706||2016||8 صفحه PDF||سفارش دهید||دانلود رایگان|
این مقاله ISI می تواند منبع ارزشمندی برای تولید محتوا باشد.
- تولید محتوا برای سایت و وبلاگ
- تولید محتوا برای کتاب
- تولید محتوا برای نشریات و روزنامه ها
پایگاه «دانشیاری» آمادگی دارد با همکاری مجموعه «شهر محتوا» با استفاده از این مقاله علمی، برای شما به زبان فارسی، تولید محتوا نماید.
• Core design concept of supercritical light water cooled fast breeding reactor is developed.
• Compound system doubling time (CSDT) is applied for considering an appropriate target of breeding performance.
• Breeding performance is improved by reducing fuel rod diameter of the seed assembly.
• Core pressure loss is reduced by enlarging the coolant channel area of the seed assembly.
A high breeding fast reactor core concept, cooled by supercritical pressure light water has been developed with fully-coupled neutronics and thermal-hydraulics core calculations, which takes into account the influence of core pressure loss to the core neutronics characteristics. Design target of the breeding performance has been determined to be compound system doubling time (CSDT) of less than 50 years, by referring to the relationship of energy consumption and economic growth rate of advanced countries such as the G7 member countries. Based on the past design study of supercritical water cooled fast breeder reactor (Super FBR) with the concept of tightly packed fuel assembly (TPFA), further improvement of breeding performance and reduction of core pressure loss are investigated by considering different fuel rod diameters and coolant channel geometries. The sensitivities of CSDT and the core pressure loss with respect to major core design parameters have been clarified. The developed Super FBR design concept achieves fissile plutonium surviving ratio (FPSR) of 1.028, compound system doubling time (CSDT) of 38 years and pressure loss of 1.02 MPa with positive density reactivity (negative void reactivity). The short CSDT indicates high breeding performance, which may enable installation of the reactors at a rate comparable to energy growth rate of developed countries such as G7 member countries.
Journal: Nuclear Engineering and Design - Volume 296, January 2016, Pages 30–37