Interscan reproducibility of computer-aided epicardial and thoracic fat measurement from noncontrast cardiac CT

BackgroundEpicardial fat volume (EFV) measured from noncontrast CT is associated with coronary atherosclerosis and increased risk of major adverse cardiovascular events. Interscan reproducibility of EFV quantification from noncontrast CT has not been reported.ObjectiveWe evaluated the interscan (intrascanner and interscanner) reproducibility of EFV and thoracic fat volume (TFV) measurements from noncontrast CT.MethodsWe studied 25 consecutive patients who were scanned twice with 4-slice multidetector CT (MDCT), with 120 kVp, 2.5-mm slice thickness (intrascanner) and 23 consecutive patients who were scanned with MDCT and electron beam CT (EBCT) with 3-mm slice thickness (interscanner). For each scan, EFV and TFV were measured from user-defined range of CT slices covering the heart by experienced imaging cardiologists. Voxels within −30 to −190 HU within the epicardial contours was quantified as EFV. TFV was quantified within the heart range automatically. Repeatability coefficient (RC), defined as 1.96 × SD of the differences between pairs of repeated measures, was determined.ResultsCorrelations for interscan measurements of EFV and TFV were high for both intrascanner (MDCT-MDCT) and interscanner (EBCT-MDCT) data (correlation coefficient ≥0.98). RC values were lowest (4.3% for EFV and 5.4% for TFV) for intrascanner same-observer measurement. For intrascanner cross-observer measurement, RC values were 10.7% for EFV and 9.0% for TFV. For interscanner data, RC values ranged from 6.8% to 8.2%.ConclusionEpicardial and thoracic fat measurements with the use of either MDCT or EBCT are highly reproducible.