Accidents and transients analyses of a super fast reactor with single flow pass core

• Safety analysis of a Super FR with single flow pass core is conducted.
• Loss of feed water flow leads to a direct effect on the loss of fuel channel flow.
• The core pressure is sensitive to LOCA accidents due to the direct effect.
• Small LOCA introduces a critical break.
• The safety criteria for all selected events are satisfied.

The supercritical water cooled fast reactor with single flow pass core has been designed to simplify refueling and the structures of upper and lower mixing plenums. To evaluate the safety performance, safety analysis has been conducted with regard to LOCA and non-LOCA accidents including transient events. Safety analysis results show that the safety criteria are satisfied for all selected events. The total loss of feed water flow is the most important accident which the maximum cladding surface temperature (MCST) is high due to a direct effect of the accident on the total loss of flow in all fuel assemblies. However, actuation of the ADS can mitigate the accident. Small LOCA also introduces a critical break at 7.8% break which results high MCST at BOC because the scram and ADS are not actuated. Early ADS actuation is effective to mitigate the accident. In large LOCA, 100% break LOCA results a high MCST of flooding phase at BOC due to high power peaking at the bottom part. Use of high injection flow rate by 2 LPCI units is effective to decrease the MCST.