Gas entrainment allowance level at free surface and gas dynamic behavior of sodium-cooled fast reactor

In a sodium-cooled fast reactor (SFR), inert gases exist in the primary coolant system either in a state of dissolved gas or free gas bubbles. The sources of the gas bubbles are entrainment and dissolution of the reactor cover gas (argon) at the vessel free surface and emission of the helium gas that is produced as a result of disintegration of B4C control rod material. The gas in the primary system may cause disturbance in reactivity, nucleation site for boiling, etc. Therefore, it is a key issue from the design and safety viewpoint and the allowance level is necessary regarding the gas entrainment at the free surface and the gas bubble concentration in the primary system. In the present study, a gas entrainment allowance level at the free surface is discussed and rationalized for the Japanese SFR (JSFR) design. The influence of the gas entrainment is evaluated using the void fraction at the core inlet. Design criteria for the acceptable level of the gas entrainment and gas concentration are proposed in consideration of the background level of gasses in the coolant. For the purpose, a plant dynamics code VIBUL has been developed to apply to the JSFR design to evaluate the concentration distribution of the dissolved gas and the free gas bubble in the JSFR system. Using the plant dynamics code for the bubble behavior, the background level of the free gas (void fraction at the core inlet) has been obtained. Assuming that the total void fraction should be kept below 105% of the background level, a preliminary design allowance level of gas entrainment is proposed as the map in terms of the entrainment rate and the entrained bubble radius. Furthermore, the possibility of bubble removal and design requirement of the device is investigated to satisfy the allowance level. It is noted that the background level is already very low in comparison with the induced void reactivity by the void passing the reactor core.

Research highlights
► A plant dynamics code is developed to evaluate the concentration of gas bubble in SFR.
► Influence of the gas entrainment is evaluated using the void fraction at the core inlet.
► A design allowance level of gas entrainment is proposed based on the background level.
► Possibility of bubble removal and design requirement of the device is investigated.