Simulation of MCCI with the TOLBIAC-ICB code based on the phase segregation model

In the event of a severe accident in a pressurized water reactor, corium, a mixture of molten materials issued from the fuel, cladding and structural elements, appears in the reactor core. In some circumstances, corium is likely to melt through the reactor pressure vessel and spread over the concrete basemat of the reactor pit. Molten core concrete interaction (MCCI) then occurs. The main question that has to be addressed in this scenario is whether and when the corium will make its way through the basemat. For some years, CEA is developing a numerical code named TOLBIAC-ICB in order to simulate molten core concrete interaction in reactor case. The general approach used in this code is based on the phase segregation model developed by CEA. The solid phase is supposed to be located at the corium pool boundaries as a solid crust composed of refractory oxides, whereas the corium pool contains no solid. The interfacial temperature between the crust and the pool is the liquidus temperature calculated with the composition of the pool. The interaction between thermalhydraulics (mass and energy balances) and physico-chemistry (liquidus temperature, crust composition, chemical reaction) is modelled through a coupling between TOLBIAC-ICB and the GEMINI code for the determination of the physico-chemistry variables. The main purpose of this paper is to present the modelling used in TOLBIAC-ICB and some validation calculations using the data of experiments available in the literature.